Trek Frame Serial Numbers (Draft)
Prior
to Late 1980 | Late 1980 to Late
1986 | Late 1986 to 1997+
Foreign
Built 82 to 95 | Mid 90s 3-Part
Numbers | Jazz by Trek
Missing Serial Numbers
Serial Number Location
Trek frame serial numbers (SNs) are typically stamped
into the bottom of the bottom bracket shell. In the case of some early
80s Treks, the number is under the plastic cable guide on the
bottom of the shell. Just remove the plastic cable guide to see the
number. The other place Trek (or their subcontractors) stamped the SN
is at the lower end of the seat tube.
Note: The SN on your original sales receipt may not
match the one on your bike. Sales persons sometimes had difficulty reading
the numbers.
Many Trek bottom bracket shells have a one or two letter
code stamped separately from the serial number. This was made by the
individual framebuilder to mark his/her work. If you know which mark
was used by a particular craftsman, please let me know.
Serialization Date
The dates coded in the serial numbers, or the dates
inferred from the numbers, are dates on which the new frames were stamped
with serial numbers (serialized). These dates are not necessarily
the same as the model year of the frame. At some time late in each
year (beginning generally September or October) the frames produced
were created from designs, and painted with colors, for the next year.
Hard to read?
Trek serial numbers can be hard to read. Clean the area
well, and use lots of light at various angles. A suggestion by J. Hansen
can help you read a serial number:
 |
Serial Number highlighted with
red wax. Click on image to see an enlarged version. (Photo by
J. Hansen)
|
"Rub the area with candle wax of a color that contrasts
with your paint. Lightly wipe it off with a rag. The wax stays in the
indented area of the S/N. Now you can easily read the number. I have
included a photo of the results from my bike. In this case I used a
red candle to make the serial number stand out. Note that even with
the serial number filled with wax, the leading "0" is almost
imperceptible."
Serial Number Descriptions
The serial number descriptions are divided into five
categories. Click on the link below to go to the appropriate category.
Prior
to Late 1980 | Late 1980 to Late
1986 | Late 1986 to 1997+
Foreign
Built 82 to 95 | Mid 90s 3-Part
Numbers | Jazz by Trek
Missing Serial Numbers
PRIOR TO LATE 1980
Before late 1980, Trek used an alphanumeric serial number
scheme. Each seven-character number consists of three letters mixed
with numerals. The serial number list and the code for the list are
not available from Trek (but hope springs eternal). In the meantime,
we have the results of the serial number decoding project:
Serial Number Decoding Project
Nearly two hundred Trek owners submitted their
frame's specifics to help decode the serial number system used
from 1976 to late 1980. Our thanks to these generous cyclists.
These serial numbers have seven characters, in
the form L N L N L N N, where L is a letter and N is a number.
Here are the results:
The first letter is the model designation.
The letter code indicates frame model, which would include bike
models made from that model of frame.
A = 210 (see note *
below)
B = TX200 (see note **
below),
C = TX300,
D = 530,
E = TX500,
F = 510,
G = TX700 and TX770 (see note***
below)
H = 710,
I = 730,
J = TX900.
K = 910,
L = 930,
M = 412 and 414 (****
see year exception A below),
N = 610, 613, and 614 (****
see year exception
A below),
O = 950.
The first number is the frame size, where
1 = 19.75",
2 = 21",
3 = 22.5",
4 = 24",
5 = 25.5",
6 = 57.5 cm (ctc) or indicates a custom size. (See Year Exception
C.)
7 = 59 cm (ctc) or indicates a custom size. (See Year Exception
C.)
9 = 63.5 cm (ctc) or indicates a custom size.
(See Year Exception C.)
The second letter represents the month
the frame was serialized:
A
|
B
|
C
|
D
|
E
|
F
|
G
|
H
|
I
|
J
|
K
|
L
|
Jan
|
Feb
|
Mar
|
Apr
|
May
|
Jun
|
Jul
|
Aug
|
Sep
|
Oct
|
Nov
|
Dec
|
The second number is the last digit of the
year, 6, 7, 8, 9 (for 197X) and 0 for 1980. See
note below, ****,
for year exceptions. Again, this
is the date of serializing, not necessarily model year.
The last three characters - The final letter
ranges from A to Z and the final two numbers go from 01 to 99.
The last letter might be a run designation, with the last two
numerals the frame number in that run? Alternatively, the letter
extends the range of the character from 0 to 9 (if a number) to
1 to 26. This gives a range of 2600 for the 3 characters. Any
other ideas for these last three characters?
The rest of the code defines time to a month.
Perhaps once Trek was nearing more than 2600 bikes/frames of a
given model per month, a new serial number scheme needed to be
developed. Hence the change to the sequential system started in
late 1980.
Notes:
* There
is no Model 210 in the brochures on the site; however, four
frames have been reported with a SN leading with an "A".
Two had Ishiwata high tensile double butted main tube stickers,
the other two were unmarked. They have touring length chainstays
(one was measured at 44.5 cm) and the rear dropouts are without
adjusters. According the the SNs, they were made after the TX200
was no longer in the brochures. Another small mystery; for now
we'll call it a 210. (Note: These frames previously were speculated
to be 310s. However, without adjusters, as was the model TX200,
they more likely were called 210s.
** One interesting
variant of the SN code has been submitted. It has a leading
B and has eight characters instead of the usual 7 (B4K6B109).
It has SunTour dropouts, and had a partial tubing sticker that
included the text "TENSION BUTTED". The date from
the SN is Nov. 76. Probably a TX200 with an extra character
in the SN.
*** Several
frames with a leading serial letter of G have been reported
with Columbus tubing stickers. TX700 frames were available as
special order, with Columbus tubing instead of the specified
Reynolds 531. These bikes were designated as Model TX770.
**** Year
Exceptions:
A. Serial numbers beginning with M or
N (41X and 61X bikes or frames) seem to have a different meaning
for what normally is the year digit. The year digit is the fourth
character in the number. In the 50 M and N serial numbers that
have been sent in by owners, the year numbers go from 0 through
9. The remaining part of the serial numbers seem normal.
According to the brochures, Trek did not make
41X and 61X bikes or frames during 76, 77, 78, and 79 and also
not in 83, 84, 85, 86, 87, 88, or 89. These serial numbers apparently
do not follow the year convention used for other Trek models.
It is likely these frames, SNs beginning with M or N (Models
41x and 61X), were contracted out, and were given the old serial
number form so as not to interfere with the sequential numbers
being assigned by Trek in their shop, which began in late 1980.
This variation to the SN system may have been
done to extend the numbering system. By using the fourth character
as an extension of the last three, the serial numbers could
be extended from 2600 possible combinations to 26,000 for a
given month.
For M and N leading serial numbers, if the TREK
letters on the seattube have no colorwrap behind, the bike is
from 1980 or perhaps 1981. If it has a colorwrap, the bike is
probably from 1982.
B. One early TX700, an evaluation frame
sent to a bike shop, had a 4 in the year digit. That 4 may signify
an evaluation unit.
C. Three 950 frames have been reported
that contain unlikely year codes of 5, 6 and 7. It is very unlikely
they were made in 1975, 76, or 77, more likely (from the brochures)
1980, 81, or 82. Another 950 frame was reported with a 0 in
the year code, but was painted as a 1982. From the geometries,
they probably were custom frames. Trek apparently used a different
coding method for these frames, perhaps so as not to interfere
with the production frame serial numbers.
When a Trek frame was repainted by Trek, an additional
set of numerals was often stamped into the bottom bracket to indicate
the frame was repainted. These numbers were usually four digits,
in the form NNNN.
|
LATE
1980 TO LATE 1986
Late in 1980, Trek changed to a new numbering system
for their frames built in the U.S. The frames were numbered sequentially,
beginning with number 000001. The record of the assembly runs was documented
in a handwritten journal. Trek (Kevin Tita) graciously provided a copy
of the journal for this web site. The list ended in November of 1986
with number 279975. This serial number system actually extended through
at least 1997 (see Table II below).
The journal includes run number, model number, frame
size, and serial number range. Incidental information, including dates
and comments on the frames, appears sporadically through the journal.
A "run" was for a particular frame size and frame model.
We all owe thanks to Luker White who
generously donated his time to convert much of the paper list to digital
form.
Click on the date link
in Table I below to go to the detailed serial number information for
that year.
Table I - 1980 to 1986
Year
|
Beginning Serial Number
|
Ending Serial Number
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Notes for Table I:
- Table I contains dates of frame serializing, and
are not necessarily model year. At some time late in each year
(generally September or October) frames were built for (then painted
with colors for) the next model year. This journal information is
summarized by year in Table I. The year designations in the table
are approximate; not all of the runs are sequential in time. This
may be a result of subcontracting some frame fabrication.
- For some years, the model number given may be the
lowest number (or an X00 number) for a series of models that have
the same frame. For example, a 1981 frame appearing on the list as
a Model 610 could have been built into either a 613, 614, or 616 bike.
- Some of the Model 170 serial numbers are 6 digits
but do not follow the numerical sequence. A future task is to sort
170 numbers. Some of these are presented in the 83, 84 link
at the bottom of the table.
- Some early and mid 80s bottom brackets were marked
with 58TSI or 60TSI. In the early 1980s Tim S. Isaac designed new
lugs and a new bottom bracket shell for Trek. The new bottom bracket
shell is typically marked with 58TSI (or more rarely, 60TSI). This
designation is not part of the serial number but is a model number
of the shell. The TSI are Tim's initials. The 58 or 60 refer to the
angle between the seattube and the downtube.
- Some frames in this period have a leading "A"
before the 6 digit number. This may be more prevalent on lower level
models. The "A" may not be part of the SN. Just disregard
it when looking up the number in the tables below.
- Frame Sizes in the SN list below are as given on
the paper copy. For some entries, only a two-digit number was given,
the extra 1/2 or 3/4 inch was dropped. So - an entry of 22 inches
really means a 22.5" frame size, 19 means 19.75", 25 means
25.5".
- The list has two major gaps, corresponding to missing
pages. Page 9 ends with SN 027870 and the next page starts with 029118.
Page 61 ends with 210065 and the next page starts with 215226.
- The SN list for 1986 has some serial number ranges
with annotations about POs (purchase orders) to "Merida".
These are for Model 800, 830 and 850 mountain bikes and Model 300
road bikes. These were made late in the year, so they probably were
all 1987 models. At least some of these were provided to Trek as "frames
only". One reported SN in these ranges, for an 850, was prefaced
by the letters TML. From the serial number list, the number of Trek
frames or bikes made by Merida late in 86 totaled at least 8251.
Merida is a Taiwanese bike company that was
established in 1972. It is currently a major, worldwide player in
the bicycle business. See http://www.merida.com/
for information on this company.
LATE 1986 to 1997+
This 6 digit (7 digit beginning in 1993) code extended
into at least 1997, at least for some models (generally mid to upper
level and made in the U.S.). The number may or may not have a leading
zero, making the six digits into seven digits prior to 1993. The model
is not available for these numbers but the year can be determined or
estimated from Table II below. The information in the table is from
serial numbers submitted by site visitors. Our thanks to them. In contrast
to the serial number dates in Table I above, the years in Table II
represent model years, not the date the serial number was applied.
Table II - Model Years 1987 to
1997
Year
|
Serial Numbers Include
|
1987
|
270821, 284237, 284335, 293788,
301294, 304445, 304940, 307880, 308292
|
1988
|
309634, 316981, 319336, 335133,
346451, 347944, 356837, 360384
|
1989
|
369203, 379079, 391236, 406793,
427402, 438108
|
1990
|
513747, 532881, 563678
|
1991
|
579529, 629426, 653761, 740528,
79xxxx
|
1992
|
771408?, 840762, 873805, 883719,
900224
|
1993
|
1035688, 1087?34, 1106529, 1109196,
1125523, 1125738
|
1994
|
1164917, 1269067
|
1995
|
1331934, 1406630, 1431480, 1439467,
1506862
|
1996
|
1544446, 1878372, 1955570
|
1997
|
1876296?, 1963294
|
FOREIGN-BUILT FRAMES
AND BIKES 1982 to MID 90s
Three different serial number forms have been submitted
for 1983 Trek Model 400 frames. One, marked "made in Japan",
begin with JS followed by six numerals. The SN was located on the bottom
of the bottom bracket. A second serial number is 81765. According to
the Trek-provided SN list, this corresponds to a 22" (22.5")
Model 400 frame made in 1983. This SN form is for frames/bikes made
in the U.S. The number was marked on the bottom of the bottom bracket.
The third number is 403300950, which indicates foreign built, but the
nation of origin sticker was missing. This number was marked at the
bottom of the down tube. It is likely this 400 was made by the same
manufacturer as the 1984 bikes described in the paragraph below. For
the 1983 Model 400, it appears Trek used three sources for their frames
or complete bikes.
Several 1984 Trek 460s,
420s and 400s have been reported with 9 digit numeric serial numbers
stamped on the lower seat tube instead of on the bottom of the bottom
bracket. These frames, or complete bikes, apparently were made in Japan
by an outside contractor. The numbers submitted are in the range of
401000000 to 440000000.
An 8 or 9 character alphanumeric code was used for mid-
and low-level frames subcontracted in Taiwan. Most of these bikes were
labeled "Made in Taiwan". This form of serial number appears
to have been used during the period 1987 to 90. The number leads with
a T (for Trek?) then a numeral, a letter, then five numerals. Sean Hickey
suggested the first numeral is the year of manufacture, and the letter
is the month of the year (A - L). This is confirmed by serial numbers
that were submitted by other Trek owners.
A later 8 and then 9 character alphanumeric SN scheme,
used beginning in about 1989, also begins with a T (for Trek?). These
later T numbers were used on lower level subcontracted frames but do
not follow the 2nd and 3rd or 3rd and 4th character date meanings above.
Beginning in about 1994, an 8 character alphanumeric
code was used for some Trek bikes made in Taiwan. It begins with G and
another letter (e.g. GQ, GR, GS, GV and GZ). These are followed either
by: 6 numerals, or a number, a letter, followed by four numerals. The
first numeral in the SN is likely the year of serialization.
MID 90s 3-PART SERIAL NUMBERS
During the mid to late 1990s, Trek used a three-part
serial number and information code system on the bottom of bottom bracket
shells. This scheme seems to have been used for bikes manufactured overseas
and perhaps for bikes made in the USA by Trek. The scheme of the numbers
varied, perhaps as a function of the actual foreign manufacturer. Examples
are given below:
Example 1
14
066 71
990 18
31 9406
The first line is the actual serial number. The information
on the left lower line is model number (990) and frame size (18 inches).
On the right lower line the meaning of the 31 is unknown. The 94 is
the manufacturing year (1994) and the month (06 or June)
Example 2
WTU 2054748N
750 17
B10407
The upper line is the serial number. The left lower
line is model (750) and frame size (17 inches). The meaning of the B1
is unknown. This is from a 97 model bike, so likely the 7 is the year.
Example 3
For a 15" women's 1999 model 720, the numbers are:
T B1 0407
WTUD01330R
A0199
Here the model number and frame size are absent. The
center number is the actual serial number. The 99 is the year, and the
01 may indicate January.
Example 4
For a 18" 1997 Model 8000 mountain bike:
WTU 1981461
M B1 0406
8000
18
The top line is the serial number. Interestingly, the
1981461 is probably within the realm of 1997 in Table II above. The
8000 and 18 are model and size in inches. The 0406 may not be a date
code, since it does not corrspond with what I believe is the year of
the bike.
If you have a serial number of this form, please send
it along with information about your bike. Thanks to Arnold O' Sioléir,
Wayne Snyder, Christine Flynn, and bidaci for the info above.
MODERN WTU NUMBERS
Trek has used the WTU designation in their serial numbers
from the mid-90s to today. Trek has used these numbers not only for
Trek bikes but also for their Klein, Gary Fischer and Lemond brand bikes.
In a Safety
Recall Notice dated 1 May 2009, Trek describes some features of
2009 serial numbers. It states "The first three digits after WTU
represent the sequential date; the number of days from the beginning
of the year. The letter at the end of the serial number represents the
model year." The notice states that a final leter D indicates 2009.
For the serial number WTU301D86571D, the framewas made
on the 301st day of the year. The final D indicates the bike was made
for the 2009 model year. Extending backwards from 2009 one gets the
following last character meanings.
N
|
O
|
P
|
Q
|
R
|
S
|
T
|
U
|
V
|
W
|
X
|
Y
|
Z
|
1993
|
1994
|
1995
|
1996
|
1997
|
1998
|
1999
|
2000
|
2001
|
2002
|
2003
|
2004
|
2005
|
|
|
|
|
M,N, M |
P, P, P, P |
R, R |
S, S |
T, T, T |
U |
|
X |
|
A
|
B
|
C
|
D
|
E
|
F
|
G |
H |
I |
J |
|
|
2006
|
2007
|
2008
|
2009
|
2010
|
2011
|
2012 |
2013 |
2014 |
2015 |
|
|
A, A |
B, B, |
J, J, C |
D |
E, E |
F
|
G |
H |
I |
J |
|
|
Trek 2002 4300 had no final letter in SN
JAZZ BY TREK
Jazz is a line of foreign-built, entry-level bicycles
that Trek sold in the early 90s. (See the history
page for a bit more info and the brochures
page for a 93 catalog). There seems to be at least three serial
number types:
- A Flipside model had the serial number JT0116 stamped on the bottom
bracket shell. The JT probably stands for "Jazz" and "Trek".
The numbers may be the sequential frame number, beginning at 0001.
- The second type is a 10-character serial number. The first two characters
are letters which are followed by eight numbers. Examples are JT09010099
and FI08003231.
- A Latitude model has a 10-digit, all-numeric serial number: 1230707859.
This number also was stamped on the bottom of the bottom bracket shell.
These three serial number forms may mean that Trek used at least three
subcontractors for the Jazz line.
MISSING SERIAL NUMBERS
A few owners of early
Treks, mostly, from 1976 through the early 80s, report their frames
are not marked with serial numbers. A past Trek employee wrote that
the police in the Madison and the surrounding area said TREK was famous
for bikes with no serial numbers. Seems hundreds didn't get any numbers
at all. The serial number guy just missed a few?
Three other possibilities:
1. In the early years Trek allowed, and even encouraged, their workers
to use company equipment and materials to build personal frames after
hours. These frames often were not serialized. The practice stopped
after production was increased, resulting in little available down time
for the equipment. 2. The serial number on a repainted frame that was
not first stripped, may disappear under the new paint.
3. The number is under the plastic cable guide attached to the bottom
of the bottom bracket shell.
Prior
to Late 1980 | Late 1980 to Late
1986 | Late 1986 to 1997+
Foreign
Built 82 to 95 | Mid 90s 3-Part
Numbers | Jazz by Trek
Missing Serial Numbers
Brochures
| Price Lists and Values
| Trek History |
Trek Timeline |
Serial Numbers
Component Dates
| Gallery |
Contact | Buy/Sell Suggestions
Refurbish/Upgrade |
Bike Resources
| Home
*Trek is a trademark
of Trek Bicycle Corporation, Waterloo, WI
All copyrights in
the TREK brochures, pricelists, owner's manuals and photographs displayed
on this website are the sole property of Trek Bicycle Corporation, Waterloo,
Wisconsin.
All materials in
this site not copyrighted by others are Copyright © 2001-2014 Skip
Echert Web Associates, All rights reserved.